10W Multi Color Laser System / PICO-10 Technical Parameters:
Parameter:
Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 380VA
Total optical output: 10W
Laser module:Kvant
Laser Balance(R/G/B):
2W/637nm KVANT
4W/520nm KVANT
4W/445nm KVANT
Beam diameter: 6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Galvo Scanner :
DT-50B 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:(optional)
10℃ to 35℃ (Standard)
-20℃ to 40℃ (Temp.Control System)
Size:462*307*263mm
Carton Package Size:520x470x380mm
N.W: 29kg
Feature:
1. Pico series: laser module entirely manufactured in Europe.
2. High quality laser module, unique design.
3. Black paint Stretching aluminum housing
4. Self-developed laser ILDA-AMP has been pre-installed inside
5. The optical bench by suspension design
6. ILDA Standard, also DMX or SD-card controlled
7. Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8. Self-developing handle design, use it for hanging in any rotation angle, or portable.
Pico-10 is a 10W multi color laser light projector, as laser module entirely manufactured in Europe, which can give you a stunning laser effect, ideally suitable for various venues and laser shows as well the outdoor laser displays.
Its’ all laser diodes module entirely manufactured
in Europe, for brighter more vibrant colors and longer lifetimes, give better
beam effect compare with common Chinese-made laser projector. The measured the
beam diameter at 50m distance is only 30% of that of the conventional laser
device.
Upgraded the Pico-10 downsize the volume, the greatly improve the radiating effect. In addition, we fix up the unique the handle system making the hanging any rotation angle. The fixed handle using in unique damping design, use it you can operate any rotation angle of projection. Beside the fully sealed and IP67 waterproof section, it still can keep well function even in the harsh environment.
Self-developed laser ILDA-AMP has been
pre-installed inside; it allows you to use longer ILDA signal lines to control,
interference and graphics jitter will not occur.
For the self-developed temperature control system, the projector can operate at minus 20 degrees to plus 40 degrees ambient temperature, and to have independent over-temperature protection, you no longer need to worry about delicate laser because of overheating and damage. The fan speed linear control by MCU, the projector will function in quite while in the normal temperature.
In 0-5V input drive signal, the laser driver circuit can provide up to 100 kHz switching frequency. If the case of each RGB color has 100 kHz modulation speed, in theory, you can get 360 000 color output.
Galvo scanner system can upgrade to:
CT-6215 30Kpps
Suitable venues:
Stable, high quality laser light device needed indoor club
Medium and large theater and hotel, wedding concert or laser show
Area less than 1000㎡,height below 12m, indoor or outdoor space
ANNOUNCEMENT: This kinds of landmark laser projector is self-developed by Supercan CO.,LIT, which is the only official certificated productions in mainland China.
Do not believe other websites false info; my company reserves the right to pursue legal action.
READ THE CERFICATE AND PETENT
KNOW MORE ABOUT LASER SHOW
01.Aug 2018
