30W High Power RGB Laser System / PICO-30 Technical Parameters:
Parameter：
Power requirements: 190-240V/50Hz~60Hz
Consumption: 750W
Total optical output: 30W
Laser module:8W/637nm 10W/520nm 12W/445nm
Beam diameter: 8mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:CT-6215 Large 30Kpps Max.80Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:
0℃ to 35℃ (standard)
-20℃ to 40℃ (With Temp. Control System)
Size:532*342*238mm
Weight: 45kg
Feature:
1.Same volume and weight as Pico-20, but stronger power(30W)
2.The most powerful device of Pico series: laser module entirely manufactured in Europe
3.Black paint stretching aluminunm housing
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.
9.After housing in waterproff housing, it can use in various occassions.
Pico-30(Pico Series)
This is our highest
power laser show projector even
now independent made by Supercan-CO.
It uses all the diode laser module entirely manufactured in Europe, that the color balance is Red for 637nm 8W, Green for 520nm 10W, and Blue for 445nm 12W. This configuration has a better beam diameter mode, then with the CT-6215HP 30Kpps the machine will give whatever performance you want.
Pico-30 is as weight as Pico-20(43KG), but it provide a 30W laser output.
Compare with the Conventional semiconductor pumped laser, in 50M case, we measure that is double brightness.
For the outdoor display applications, we promote the green laser module to 10W that assure the visual range while the green laser module output the laser animation graphics. Beside, that has a longer lifetimes for why we choose the Kvant green laser module.
The Pico-30 use the whole mask design, the remaining laser light will not be diffuse reflection, as well its inner optical system can not be observed form outside so that reduce the risk that attract the bugs to fly into. That increases the safe and hidden coefficients, therefore the audiences hardly found where the light from, create a mysterious stage atmosphere.
This
is a very powerful multi-color laser projector system.With high quality beam
and special cooling control system.
Its work environments temperature range could
be from -20 to 40 deg.
First of all, the fan which has
linear speed controlled by MCU, if the laser diode is not very hot,
the MCU will slow down the fan's speed, so this make the projector has very
small noise. Especially for high-end elegant indoor show, this is very
important, because this is the first impression giving to your clients.
This is not just a common standard fan
control part, we spend about 2 years in testing each kind of laser work on
different temperature, and finally got the set point.
High frequency laser driver. 0-5V analog signal input upgrade to 100kHz
TTL
When it is 100kHz for each color, then
you can get about 36.0000 colors output.
The beam size and beam angle of the R G B
color almost the same!
Beam size <6.5mm, and It have very small
angle, long distance you will get more powerful beam.
Comparing with the old laser diode, the same
power output, but longer distance of the visibility.
SUITABLE FOR ANY CASES AND VENUES!
ANNOUNCEMENT: This kinds of landmark laser projector is self-developed by Supercan CO.,LIT, which is the only official certificated productions in mainland China.
Do not believe other websites false info; my company reserves the right to pursue legal action.
01.Aug 2018
