Products >> HB-Laser System >> 3W RGB Laser Projector_HB-Laser X3_SC3890
3W RGB Laser Projector
Model：HB-Laser X3
Item：SC3890
3W RGB Laser Projector / HB-Laser X3 Technical Parameters:
Parameter:
Power requirements: 190-240V/50Hz (±5%)
Consumption: Max.150W
Total optical output: 3.2W
Laser Module: 637nm 680mW / 520nm 900mW / 445nm 1600mW
Beam diameter: 3.5x4.5mm
Divergence: Red<1.0Mrad / Green and Blue<0.8Mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner set:DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: (optional)
10℃ to 35℃ (Standard)
-20℃ to 40℃ （Temp. Control System)
Size:281*268*173mm
Weight: 8.9kg
Optional:
1.Scanner Fail & Safety Function.
a) When the scanner feeback fail will stop the laser output <50ms
b) When the scanner scan angle <5% (Full angle signle<=10V) will stop the laser output <50ms
2.Moncha.Lite
You can use Network / Mobile / DMX to control the Laser, also have autostart function.
3.Pangolin FB4
You can use Pangolin Beyond or Quickshow to control the Laser.
3W Muilt-Color Lasers
360 View
HB-Laser X3 is a 3W RGB muilt color laser system.
Laser module: 638nm-680mW / 525nm-900mW / 450nm-1600mW.
DT-30 scanner, scan speed up to 30Kpps, Max scan angle 60.Deg
This laser system's housing are very small, weight only 8.9Kg, You can install anywhere you want.
DB25 Standard ILDA signal, ILDA-AMP inside. Normally, You can link more than 32x Laser system.
ILDA cable can be 150meters long, and the signal won't be weaken, only our laser projectors has this function.
All kinds of ILDA controller are acceptable, for example: PHOENIX / Pangolin / Moncha ect.
Pangolin FB4 Back-Pannel
08.Dec 2019
