30W Green Laser For Outdoor / G30 II Technical Parameters:
Rated Voltage: 190-240V/50Hz (±5%)
Consumption: Max.2000VA
Total optical output: 30W
Laser module: 2x532nm 15W CNI
Visible Distance: 10-20KM
Galvo Scanner: DT-50BB 30Kpps Max.60Deg
Dimensions: 440*440*760mm
Flight-Case Dimensions: 840*560*600mm
N.W: 40Kg
G.W: 65Kg
Laser Rotation Mode:
1.X-Axis No limited.
2.Y-Axis manual adjust Positive and negative 15Deg
3.Waterproof:IP55
4.Operation Temperature: -20℃ to 50℃ (Temp. Control System)
5.Laser Function:Micro-Controller inside, Outdoor mode auto-run function x12
Feature:
1.Silver paint Stretching aluminum housing
2.Fully sealed optical section, IP67 waterproof power supply
3.Self-developed Temp.control system
4.The optical bench by suspension design
5.Flash-back via Moncha or Pangolin FB4
Welcome to G30 Sky Beam Outdoor Laser Systems!
This is a 30W Sky Beam Outdoor Laser Systems.
It used for outdoor to make the visible laser beam in the air and long visibility distance.
That term “sky laser projector” in Europe and American is more common.
G30 is the high power sky beam out door laser projector, Laser beam visibility distance 10~20 KM.
The forced fan cooling system, which is controlled by a micro-computer, has opened a new era of high power air cooled laser projector.
Kinds of This landmark laser projector series all have built-in self-developed temperature control system, which allow the projector be used in more complicated and hash occasions. We measure that the device can well function in minus 20 to plus 50 degrees through the application in different occasions in mainlandChina. Especial to the low temperature boot, Our device just take a couple minutes to warm up.
IP55 Housing, dustproof and waterproof, whole waterproof housing that you never worry about it in rainy day.
Easy install and convenient to operate:
* Micro-Controller built inside;
* Outdoor mode automatic function;
6x M10 screw are required for installation.
Please do the thunderbolt-protection if necessary according the ambient environment.
Whole this kind of outdoor laser projectors uses our self-developed software program and action edition mode. Whatever you edit before its action can be allowed; it will cost you about 10minutes of learn. Further on we have designed a built-in auto controller of boot and shut, save maintenance costs and necessary manpower.
* Micro-Controller built inside;
* Outdoor mode automatic function;
6x M10 screw are required for installation.
Please do the thunderbolt-protection if necessary according the ambient environment.
Whole this kind of outdoor laser projectors uses our self-developed software program and action edition mode. Whatever you edit before its action can be allowed; it will cost you about 10minutes of learn. Further on we have designed a built-in auto controller of boot and shut, save maintenance costs and necessary manpower.
31.Dec 2019
