5W Green Animation Laser System / My CNI G5 Technical Parameters:
Power requirements: 190-230V/50Hz (±5%)
Power consumption: max.350VA
Total optical output: 5W
Laser module:DPSS CNI
Laser balance:Single Green 5W/532nm
Beam diameter: 6x6mm
Divergence: <1.1mrad
Modulation: 0-5V analog, up to 30kHz TTL
Scanner Set:DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:0 to 40℃
Size:259*266*186mm
Weight: 15kg
Feature:
1. Industrial design, self-developed handle and ILDA-AMP
2. Laser module entirely manufactured in Europe
3. Self-developed Temp-control system.
4. Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
My CNI G5 CNI_Green Laser Show Projector
My CNI G5 CNI is a 5W green laser lighting, which use CNI diode laser module manufactured in China, suitable to small venues of laser animation shows, displays and graphics.
CNI diode laser moduleis manufactured in Chang Chun China, which is famous for its Comfort Noise Insertion design. It is very suitable for venues need good quality and quiet laser system,such like theater and music live show.
It can be equipped the self-developed temperature control system, make this device well function between -20℃ to 40℃.
Optical system use the technology of completely closed design that waterproof and dustproof, allow the device well functioning in different harsh environment.
This laser show projector is additionally install heat dissipation frame so that the whole CFM flux is doubled.
Fan speed is also reduced by 63%, the overall operating noise reduction of 11%.
In an environment of less than 20℃, the noise of the whole machine is reduced to 32db.That make it very suitable for the theater, music hall and other equipment noise has strict requirements of the occasion.
06.May 2018
