Rated Voltage: 110-230V/50Hz (±5%)
Consumption: Max.1500VA
Total optical output: 10W
Laser module: 532nm 10W CNI
Visible Distance: Max.3-5KM(≈9,800-16800ft)
Galvo Scanner: DT-50B 30Kpps Max.60Deg
Dimensions: 440*440*760mm
Flight-Case Dimensions: 840*560*600mm
N.W: 40Kg
G.W: 65Kg

Laser Rotation Mode:
1.X-Axis No limited.
2.Y-Axis manual adjust Positive and negative 15Deg
3.Waterproof:IP55
4.Operation Temperature: -20℃ to 50℃ (Temp. Control System)
5.Laser Function:Micro-Controller inside, Outdoor mode auto-run function x12

Feature:
1.Silver paint Stretching aluminum housing
2.Fully sealed optical section, IP67 waterproof power supply
3.Self-developed Temp.control system
4.The optical bench by suspension design
5.Flash-back via Moncha or Pangolin FB4

Sorry, You are not login.

Rated Voltage: 190-240V/50Hz (±5%)
Consumption: Max.1500VA
Total optical output: 20W
Laser module: 2x532nm 10W CNI
Visible Distance: Max.6-6KM
Galvo Scanner: DT-50B 30Kpps Max.60Deg
Dimensions: 440*440*760mm
Flight-Case Dimensions: 840*560*600mm
N.W: 40Kg
G.W: 65Kg

Laser Rotation Mode:
1.X-Axis No limited.
2.Y-Axis manual adjust Positive and negative 15Deg
3.Waterproof:IP55
4.Operation Temperature: -20℃ to 50℃ (Temp. Control System)
5.Laser Function:Micro-Controller inside, Outdoor mode auto-run function x12

Feature:
1.Silver paint Stretching aluminum housing
2.Fully sealed optical section, IP67 waterproof power supply
3.Self-developed Temp.control system
4.The optical bench by suspension design
5.Flash-back via Moncha or Pangolin FB4

Sorry, You are not login.

Rated Voltage: 190-240V/50Hz (±5%)
Consumption: Max.2000VA
Total optical output: 30W
Laser module: 2x532nm 15W CNI
Visible Distance: 10-20KM
Galvo Scanner: DT-50BB 30Kpps Max.60Deg
Dimensions: 440*440*760mm
Flight-Case Dimensions: 840*560*600mm
N.W: 40Kg
G.W: 65Kg

Laser Rotation Mode:
1.X-Axis No limited.
2.Y-Axis manual adjust Positive and negative 15Deg
3.Waterproof:IP55
4.Operation Temperature: -20℃ to 50℃ (Temp. Control System)
5.Laser Function:Micro-Controller inside, Outdoor mode auto-run function x12

Feature:
1.Silver paint Stretching aluminum housing
2.Fully sealed optical section, IP67 waterproof power supply
3.Self-developed Temp.control system
4.The optical bench by suspension design
5.Flash-back via Moncha or Pangolin FB4

Sorry, You are not login.

Rated Voltage: 190-240V/50Hz (±5%)
Consumption: Max.2500VA
Total optical output: 40W
Laser module: 2x532nm 20W CNI
Visible Distance: >20KM
Galvo Scanner: DT-50BB 30Kpps Max.60Deg
Dimensions: 440*440*760mm
Flight-Case Dimensions: 840*560*600mm
N.W: 50Kg
G.W: 70Kg

Laser Rotation Mode:
1.X-Axis No limited.
2.Y-Axis manual adjust Positive and negative 15Deg
3.Waterproof:IP55
4.Operation Temperature: -20℃ to 50℃ (Temp. Control System)
5.Laser Function:Micro-Controller inside, Outdoor mode auto-run function x12

Feature:
1.Silver paint Stretching aluminum housing
2.Fully sealed optical section, IP67 waterproof power supply
3.Self-developed Temp.control system
4.The optical bench by suspension design
5.Flash-back via Moncha or Pangolin FB4

Sorry, You are not login.

Parameter:
20W RGB Full Color Laser
Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 550VA
Total optical output: 22W
Laser module: Kvant
Laser balance(R/G/B):
5W/637nm KVANT
8W/520nm KVANT
9W/445nm KVANT
Beam diameter: 6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:CT-6215 Large 30Kpps Max.80Deg
Control:ILDA/DMX/AUTO-RUN/SD-CARD Playback/Moncha.X
Operation temperature: -20℃ to 40℃ （Temp. Control System)
Weight: 35kg
Size:530*370*260mm

Sorry, You are not login.

Parameter:
Power requirements: 190-240V/50Hz (±5%)
Consumption: Max.150W
Total optical output: 3.2W
Laser Module: 637nm 680mW / 520nm 900mW / 445nm 1600mW
Beam diameter: 3.5x4.5mm
Divergence: Red<1.0Mrad / Green and Blue<0.8Mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner set:DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: (optional)
10℃ to 35℃ (Standard)
-20℃ to 40℃ （Temp. Control System)
Size:281*268*173mm
Weight: 8.9kg

Optional:
1.Scanner Fail & Safety Function.
a) When the scanner feeback fail will stop the laser output <50ms
b) When the scanner scan angle <5% (Full angle signle<=10V) will stop the laser output <50ms
2.Moncha.Lite
You can use Network / Mobile / DMX to control the Laser, also have autostart function.
3.Pangolin FB4
You can use Pangolin Beyond or Quickshow to control the Laser.

Sorry, You are not login.

Power requirements: 90~240V/50Hz (±5%)
Consumption: max. 400W
Total optical output: 4W
Laser Module: 638nm 600mW / 525nm 1600mW / 450nm 1800mW
Beam diameter: 4.5x5mm
Divergence: Red<1.0Mrad / Green and Blue<0.8Mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner set:DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: (optional)
10℃ to 35℃ (Standard)
-20℃ to 40℃ （Temp. Control System)
Size:281*268*173mm
Weight: 8.9kg

Optional:
1.Scanner Fail & Safety Function.
a) When the scanner feeback fail will stop the laser output <50ms
b) When the scanner scan angle <5% (Full angle signle<=10V) will stop the laser output <50ms
2.Moncha.Lite
You can use Network / Mobile / DMX to control the Laser, also have autostart function.
3.Pangolin FB4
You can use Pangolin Beyond or Quickshow to control the Laser.

Sorry, You are not login.

Parameter:
Power requirements: 190~240V/50Hz (±5%)
Consumption: Max.400W (EPP-400-24)
Total optical output: >5.2W
Laser Module: 638nm 1.1W / 525nm 1.4W / 450nm 2.7W
Beam diameter: 6.5x6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner set:DT-50B 35Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Control:(Moncha.Lite Inside) ILDA/DMX/Auto Run
Operation temperature:0℃ to 35℃
Size:281*268*173mm
Package Size:386*440*265mm(Carton)
Weight: 9.2kg

Sorry, You are not login.

Parameter:
Power requirements: 190~240V/50Hz (±5%)
Consumption: Max.400W (EPP-400-24)
Total optical output: >6.5W
Laser Module: 638nm 1000mW / 525nm 1600mW / 450nm 3500mW
Beam diameter: 6.5x6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner set:DT-50B 35Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Control:(Moncha.Lite Inside) ILDA/DMX/Auto Run
Operation temperature:0℃ to 35℃
Size:281*268*173mm
Package Size:386*440*265mm(Carton)
Weight: 9.2kg

Sorry, You are not login.

Parameter:
Power requirements: 90~240V/50Hz (±5%)
Consumption: <400W
Laser Module: 525nm 5400mW
Beam diameter: 5x6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner set:DT-50B 35Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: (optional)
10℃ to 35℃ (Standard)
-20℃ to 40℃ （Temp. Control System)
Size:281*268*173mm
Weight: 8.9kg

Sorry, You are not login.

Power requirements: 190~240V/50Hz (±5%)
Consumption: max. 550W
Total optical output: 15W
Laser Module: 638nm 3500mW / 532nm 5000mW / 447nm 8000mW
Beam diameter: 6.5x8mm
Divergence: Red<1.0Mrad / Green and Blue<0.8Mrad
Scanner set:DT-50B 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: 0℃ to 40℃
Size:580*435*260mm
Weight: 45kg

Sorry, You are not login.

Power requirements: 90~240V/50Hz (±5%)
Consumption: max. 1600W
Total optical output: 15W
Laser Module: 638nm 4000mW / 532nm 5000mW / 447nm 6000mW
Beam diameter: 6.5x8mm
Divergence: Red<1.0Mrad / Green and Blue<0.8Mrad
Scanner set:DT-50B 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: (optional)
10℃ to 35℃ (Standard)
-20℃ to 40℃ （Temp. Control System)
Size:580*435*260mm
Weight: 45kg

Sorry, You are not login.

Power requirements: 90~240V/50Hz (±5%)
Consumption: max. 1800W
Total optical output: 21W
Laser Module: 638nm 5000mW / 532nm 8000mW / 447nm 8000mW
Beam diameter: 6.5x8mm
Divergence: Red<1.0Mrad / Green and Blue<0.8Mrad
Scanner set:DT-50B 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: (optional)
10℃ to 35℃ (Standard)
-20℃ to 40℃ （Temp. Control System)
Size:580*435*260mm
Weight: 45kg

Sorry, You are not login.

Rated voltage: 190~240V 50~60Hz (±5%)
Consumption: Max.150VA
Total optical output: 3.2W
Laser module:
637nm 680mW KVANT
520nm 1000mW KVANT
445nm 1600mW KVANT
Beam diameter: 3.5x4.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner set:DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: 0℃ to 45℃
Size:281*268*173mm
Weight: 8.9kg

Feature:
PICO-3 3000nW laser projector
1.Pico series: laser module entirely manufactured in Europe.
2.Fully sealed optical section, IP67 waterproof seal power driver
3.Controller pannel for brightness, size X/Y, invert X/Y.

Sorry, You are not login.

Power requirements: 90~240V / 50~60Hz
Consumption: Max.400VA
Total optical output: 6.3W
Laser module: 637nm-1300mW / 445nm-3000mW / 520nm-2000mW
Beam diameter: 5mm
Divergence: <0.8mrad
Blanking: 0-5V analog, up to 100kHz TTL
Scanner: DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation Temperature: -10℃ to 40℃
Dimensions: 300*360*183mm
Package Size: 540x540x370mm
Net Weight: 16kg

Feature:
1. Pico series: laser module entirely manufactured in Europe.
2. Self-developed laser ILDA-AMP has been pre-installed inside
3. Fully sealed optical section, IP67 waterproof seal power driver
4. Self-developed temperature control system,
5. The optical bench by suspension design
6. Controller pannel for brightness and X/Y size, Invert X/Y.

Sorry, You are not login.

Parameter:
Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 350VA
Total optical output: 9W
Laser module:kvant
Laser Balance(R/G/B):
2W/637nm
3W/520nm
4W/445nm
Beam diameter: 5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:DT-40 40Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: -20℃ to 40℃ (Temp.Control System)
Size:462*307*263mm
Weight: 29kg


Feature:
1.Pico series: laser module entirely manufactured in Europe.
2.High quality laser module, unique design.
3.Black paint Stretching aluminum housing
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.

Sorry, You are not login.

Parameter:
Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 380VA
Total optical output: 10W
Laser module:Kvant
Laser Balance(R/G/B):
2W/637nm KVANT
4W/520nm KVANT
4W/445nm KVANT
Beam diameter: 6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Galvo Scanner :
DT-50B 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:(optional)
10℃ to 35℃ (Standard)
-20℃ to 40℃ (Temp.Control System)
Size:462*307*263mm
Carton Package Size:520x470x380mm
N.W: 29kg

Feature:
1. Pico series: laser module entirely manufactured in Europe.
2. High quality laser module, unique design.
3. Black paint Stretching aluminum housing
4. Self-developed laser ILDA-AMP has been pre-installed inside
5. The optical bench by suspension design
6. ILDA Standard, also DMX or SD-card controlled
7. Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8. Self-developing handle design, use it for hanging in any rotation angle, or portable.

Sorry, You are not login.

Parameter:
Power requirements: 110~230/50Hz (±5%)
Consumption: max. 400VA
Total optical output: 12W
Laser module:KVANT
Laser balance:
3W/637nm
4W/520nm
5W/445nm
Beam diameter: 6.5mm
Divergence: <0.8mrad for each color
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:DT-50 50Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:
-20℃ to 45℃ (Temp. Control System)
Size:462*307*263mm
Weight: 29kg

Feature:
1.Pico series: laser module entirely manufactured in Europe.
2.High quality laser module, unique design.
R/G/B (mW):3000/4000/5000.
3.Black paint Stretching aluminum housing
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.

Sorry, You are not login.

Parameter:
Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 450VA
Total optical output: 16W
Laser module:Kvant
Laser Balance(R/G/B):
4W/637nm
6W/520nm
6W/445nm
Beam diameter: 6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Galvo scanner system:CT6215 Large 30Kpps Max.80Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: -20℃ to 45℃ (Temp. Control System)
Weight: 35kg
Size:532*342*238mm

Feature:
1.Pico series: laser module entirely manufactured in Eurepo.
2.High quality laser module, unique design.
3.Black paint Stretching aluminum housing,downsize volume.
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.
9.Galvo scanner system can upgrade(see overview below)
10.Ideally suitable for mediun and large venues,outdoor laser shows.

Sorry, You are not login.

Power requirements: 110-240/50Hz (±5%)
Consumption: max. 1000VA
Total optical output: 22W
Laser module:Kvant
Laser Balance(R/G/B): 637nm-5000mW / 520nm-8000mW / 445nm-9000mW
Beam diameter: 6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:CT-6215 Large 30Kpps Max.80Deg
Control:ILDA/DMX/AUTO-RUN/SD-CARD Playback/Moncha/Pangolin BEYOND/Pangolin Quickshow
Operation temperature: -20℃ to 45℃ (Temp. Control System)
Weight: 35kg
Size:530*370*260mm

Feature:
1.Pico series: laser module entirely manufactured in Europe.
2.Sufficient wattage.High power projector.
3.Black paint Stretching aluminum housing
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.
9.America Cambridge Galvo Scanner system,CT-6215 Large 30Kpps.
10.Ideally suitable for mediun and large venues,outdoor laser shows.

Sorry, You are not login.

Parameter:
Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 600VA
Total optical output: 26W
Laser module:Kvant
Laser balance（R/G/B）:
6W/637nm
10W/520nm
10W/445nm
Beam diameter: 6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:CT-6215 Large 30Kpps Max.80Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: -20℃ to 40℃ (Temp. Control System)
Size:532*342*238mm
Weight: 38kg


Feature:
1.Pico high power series: laser module entirely manufactured in Europe.
2.High quality laser module, unique design.
3.Black paint Stretching aluminum housing
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.

Sorry, You are not login.

Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 650VA
Total optical output: 26W
Laser module:Kvant
Laser Balance(R/G/B):
7W/637nm
8W/532nm Coherent OPSL
11W/(445nm+460)nm
Beam diameter: 6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:CT-6215 Large 30Kpps Max.80Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:
10℃ to 35°C （Standard）
-20℃ to 40℃ （Temp. Control System)
Size:532*342*238mm
Weight: 40kg

Sorry, You are not login.

Parameter：
Power requirements: 190-240V/50Hz~60Hz
Consumption: 750W
Total optical output: 30W
Laser module:8W/637nm 10W/520nm 12W/445nm
Beam diameter: 8mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:CT-6215 Large 30Kpps Max.80Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:
0℃ to 35℃ (standard)
-20℃ to 40℃ (With Temp. Control System)
Size:532*342*238mm
Weight: 45kg

Feature:
1.Same volume and weight as Pico-20, but stronger power(30W)
2.The most powerful device of Pico series: laser module entirely manufactured in Europe
3.Black paint stretching aluminunm housing
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.
9.After housing in waterproff housing, it can use in various occassions.

Sorry, You are not login.

Technical parameters: outdoor laser light outside the box
Suitable for laser lamp type: Pico Series
Heat dissipation: 60VA
Interface load current: 5A
Adjustable elevation: plus or minus 40 degrees
Size: 612*456*560mm
Weight: 12Kg

Sorry, You are not login.

Power requirements: 110~230/50Hz (±5%)
Consumption: max. 600W
Total optical output: 15W
Laser module:CNI
MGL-N-532-5W
OEM-XD-635-3W
OEM-GD-447-8W
Beam diameter: 6.5*7mm
Divergence: <1.0mrad for each color
Modulation: 0-5V analog
Scanner Set:DT-50B 50Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:
0℃ to 45℃
Size:462*307*263mm
Weight: 29kg

Sorry, You are not login.

Parameter:
5W Single Green Laser show projector/laser system
Total optical output: 5W
Power requirements: 190-230V/50Hz (±5%)
Power consumption: max.350VA
Laser module:DPSS CNI
Laser balance:Single Green 5W/532nm
Beam diameter: 6x6mm
Divergence: <1.1mrad
Modulation: 0-5V analog, up to 30kHz TTL
Scanner Set:DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:(Optional)
10 to 35℃(Standard)
-20℃ to 40℃( Temp.controller system)
Size:259*266*186mm
Weight: 15kg

Feature:
1. Industrial design, self-developed handle and ILDA-AMP
2. Laser module entirely manufactured in Europe
3. Black paint Stretching aluminum housing
4. Fully sealed optical section, IP67 waterproof seal power driver
5. Self-developed Temp-control system.
6. The optical bench by suspension design
7. ILDA Standard, also DMX or SD-card controlled
8. Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
9. Self-developing handle design, use it for hanging in any rotation angle, or portable.

Sorry, You are not login.

Parameter：
Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 350VA
Total optical output: 10W
Laser module:10W/532nm DPSS Laser
Beam diameter: 6x6mm
Divergence: <1.1mrad
Modulation: 0-5V analog, up to 30kHz TTL
Scanner Set:DT-50B 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: 10-35°C
Size:259*266*186mm
Weight: 15kg

Feature：
1.CNI laser module,Semiconductor pump laser technology
2.Meet the needs of a variety of outdoor laser show
3.Lesser attenuation coefficient of the laser.
4.Arbitrary 360-degree angle hanging
5.New adjustable angle lug structure.more stable and longer lifetimes.

Sorry, You are not login.

Operating voltage: 190-240V 50-60Hz
Optical Output:5000mW
Power Consumption:350W
Laser Module:520nm Diode Laser
Scanning System: DT-50B 50Kpps
Interface: ILDA DB25 IN/OUT NeuTrik NAC3FCA
Cooling mode: Fan Cooling
Control software: PHOENIX4/Pangolin/Moncha/Fiesta
Size: 52 * 38 * 20cm
Net Weight: 15kg
Flight Case: 15KG
Total weight: 30KG

Sorry, You are not login.

Parameter:
Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 150VA
Total optical output: 3.2W
Laser module:(Kvant form SK)
637nm 680mW
520nm 1000mW
445nm 1600mW
Beam diameter: 3.5x4.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner set:DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: 10-35°C
Operation pannel:individual controller(see feature below)
Size:281*268*173mm
Weight: 8.9kg

Feature:
3D laser man show projector
1.Laser module entirely manufactured in Europe.
2.High quality laser module, unique design.
R/G/B (mW):680/1000/1600.
3.Black paint Stretching aluminum housing
4.Fully sealed optical section, IP67 waterproof seal power driver
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.

Sorry, You are not login.

Operating voltage: 190-230V 50-60Hz
Optical Output:10W
Power Consumption:260W
Laser Module:JC 10W
Laser Balance: 532nm Single Green
Scanning System: DT-30K 30K Max.60Deg
Interface: ILDA DB25 IN/OUT NeuTrik NAC3FCA
Cooling mode: Auto Fan Cooling System
Control software: PHOENIX4/Pangolin
Size: 52 * 38 * 20cm
Net Weight: 19kg
Flight Case: 16KG
Total weight: 35KG


Feature:
1.Interface of ILDA and Db25 is replaced by the imported gold plated transmission interface.
2.A substantial increase in plug life,The tightness and the contact area are also greatly improved, which ensures the stable transmission of the signal of the device
3.X/Y size integradted switch,cover by imported plated transmission interface
4.Plus the size of the X/Y axis adjustment knob, you can quickly adjust the size of the output image
5.We add the brightness adjustment knob, when needed, such as the site is relatively small or practice, customers can reduce the brightness of the laser light to ensure the safety of the use of laser system.

Sorry, You are not login.

Operating voltage: 190-230V 50-60Hz
Power Consumption：75VA
Optical Output:5W
Laser Balance:
1W 635nm Red
2W 532nm Green
2W 447nm Blue
Scanning System: DT-30K 30K Max.60Deg
Interface: ILDA DB25 IN/OUT Neutrik Power-Con
Cooling mode:Fan Cooling System
Control software: PHOENIX4/Pangolin/Moncha
Size: 52 * 38 * 20cm
Net Weight: 18kg
Flight Case: 16KG
Total weight: 34KG

Sorry, You are not login.

Size:90*90*60cm
Glass size:885*88*（12-18）mm
N.W:12Kg

Sorry, You are not login.

Rated Voltage: AC90~240V 50-60Hz
Rated Power: 125W
LED Chips: 12x3200K + 12x Amber + 12x 6000K
Control Mode: DMX-512 / Automatic
DMX-512 Channels: 5CHs
Beam Angle: 60°
Dimensions: 536 x 104 x 147.5 mm
N.W.: 3.1kg

Sorry, You are not login.

Rated Voltage:AC90~240V 50-60Hz
Rated Power:60W
LED Source:36x3in1 RGB
Control Mode: DMX-512 / Auto / Master-Slave
DMX-512 Channels:3CH / 4CH / 5CH / 6CH / 9CH For Optional
Beam Angle:60°
Dimming:8 bit dimming
Overheat Protection:65°C
Dimensions:540 x 98 x 144 mm
N.W.:3.1kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:120W
LED Source:36x3W 395nm UV
Control Mode: DMX-512 / Auto / Master-Slave
DMX-512 Channels:1CH / 2CH / 3CH
Beam Angle:60°
Dimming:16 bit Fine dimming
Dimensions:536 x 104 x 147.5 mm
N.W.:3.1kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:125W
LED Source:36x4W （RGBW 4IN1）
Control Mode: DMX-512 / Auto / Master-Slave
DMX-512 Channels:4CHs / 5CHs / 6CHs / 7CHs / 10CHs
Dimming Frequency:4KHz
Beam Angle:60°
Dimensions:536 x 104 x 147.5 mm
N.W.:3.1kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:144W
LED Source:36x4W （RGBW 4IN1）
Control Mode: DMX-512 / Auto / Master-Slave
DMX-512 Channels:4CHs / 5CHs / 6CHs / 7CHs / 10CHs
Beam Angle:60°
Dimensions:536 x 104 x 147.5 mm
N.W.:3.1kg

Sorry, You are not login.

Rated Voltage: AC90~240V 50-60Hz
Rated Power: 125W
LED Chips: 12x3200K + 12x Amber + 12x 6000K
Control Mode: DMX-512 / Auto-run
DMX-512 Channels: 5CHs
Beam Angle: 60°
Dimensions: 536 x 104 x 147.5 mm
N.W.: 3.1kg

Sorry, You are not login.

Rated voltage: AC90~240V
Rated frequency: 50~60Hz + 10%
Rated power: 65W
Power series connection: <700VA, please do not connect over than 5 units
Lamp: 18x3W UV LED
Lamp wavelength: 395nm
Life time: >50000 hours
Beam angle: 40 degrees
size: 438 x 98 144mm
N.W: 2.42kg

Sorry, You are not login.

Rated voltage: AC90~240V 50~60Hz + 10%
Rated power: 60W
Power series connection: <700VA (please do not connect over than 5 units)
LED Chips: 18x395nm UV LED
Control Mode: DMX-512 / Static
DMX-512 Channels: 1Ch / 3Chs
Dimming effect: 0~100% dimming or Fading Dimming
Beam angle: 90 x 120 degrees
Dimensions: 457 x 98 x 155mm
N.W: 2.42kg

Sorry, You are not login.

Operation Power: AC100~240V 50~60Hz ± 10%
Power Rated: 120W
LED Type: 36 x 3W 395nm UV LED Chips
Drive Current: 650-700mA
Refresh Frequency:4KHz
Control Signal: DMX-512
Channel Mode: 3 kinds of different channel mode. 1Chs / 2Chs / 3Chs Choose on menu.
Control Mode: DMX-512, Master-Slave mode, Static mode.(Choose on menu)
Overheat: Dimming down
Cooling: Fan Cooling
Dimensions: 360 x 221 x 266 mm
N.W.: 3kg

Minimum order: 50pcs

Sorry, You are not login.

Operation Power: AC100~240V 50~60Hz ± 10%
Power Rated: 180W
LED Type: 26 x 5600K + 28 x 3000K 3W LED Chips
Drive Current: 650-700mA
Refresh Frequency:4KHz
Control Signal: DMX-512
Channel Mode: 5 kinds different channel mode. 4Chs / 5Chs / 6Chs / 7Chs / 8Chs Choose on menu.
Control Mode: DMX-512, Auto mode, Master-Slave mode, Static mode.(Choose on menu)
Auto Effect: 5 kinds of auto-run effects
Overheat: Dimming down
Cooling: Fan Cooling
Dimensions: 360 x 221 x 266 mm
N.W.: 3kg

Sorry, You are not login.

Operation Power: AC100~240V 50~60Hz ± 10%
Power Rated: 180W
LED Type: 54pcs*3W LED Chips 14xRed / 14xGreen / 14xBlue / 12xWhite
Drive Current: 650-700mA
Refresh Frequency:4KHz
Colors: 16.7 million colors
Control Signal: DMX-512
Channel Mode: 5 kinds different channel mode. 4Chs / 5Chs / 6Chs / 7Chs / 10Chs Choose on menu.
Control Mode: DMX-512, Auto mode, Master-Slave mode, Static mode.(Choose on menu)
Auto Effect: 5 kinds of auto-run effects
Overheat: Dimming down
Cooling: Fan Cooling
Dimensions: 360 x 221 x 266 mm
N.W.: 3kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:180W
LED:54x3in1 RGB LED Chip
Refresh Frequency:4KHz
Channels:3Chs / 4Chs / 5Chs / 6Chs / 9Chs
Firmware:LD611-54031 V3.12
Beam Angle: 25°
Overheat: Dimming down
Cooling:Fan
Dimensions:360 x 221 x 266 mm
N.W.:3kg

Sorry, You are not login.

Rated Voltage:AC190~240V / 50-60Hz
Rated Power:200W
LED:54x3W （RGB 3in1 LED）
Channels:3Chs
Power Mode: R=150W / G=150W / B=150W
Beam Angle: 60°
Waterproof standard:IP65 / IP67
Overheat protection:65°C
Dimensions:360 x 221 x 266 mm
N.W.:8.2kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:162W
LED:54x3W （RGB 3in1 LED）
Channels:3Chs / 4Chs
Beam Angle: 60°
Dimming:16 bit Fine dimming
Waterproof standard:IP67 / IP68
Overheat protection:65°C
Dimensions:360 x 221 x 266 mm
N.W.:8.2kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:150W
LED:54x4W （RGB 4in1 LED）
Channels:4CH
Beam Angle: 60°
Dimming:16 bit Fine dimming
Waterproof standard:IP67 / IP68
Overheat protection:65°C
Dimensions:360 x 221 x 266 mm
N.W.:8.2kg

Sorry, You are not login.

Parameter:
Power Requirements:AC90~240V 50~60Hz
Power Consumption:400W PFC>95% CE
LED Source:37pcs 10W CREE XML LED Chip
Driving Current:3000mA
Color Temperature:7000-7500K
Application lifetimes:100000hours
Control Protocol:DMX-512
Channel Mode:2 DMX control mode P1,P2 (1CH or 3CH)
Control Signal:DMX-512、Stand alone、Master&Slave、Static mode、LED display
Dimming Mode:DIMMER 0 is a normal fast linear dimming, 1-4 DIMMER is a soft and nonlinear dimming
Dimming:From 0 to 100 linear dimming, smooth dimming with no vision shock in low DMX value
Optical Lens:High efficiency optical reflector cup
Strobe Speed:1~20Hz
Light Emitting Angle:8 °/ 15° / 25° / 40° / 60°
Housing Material: Tensile aluminum, surface electrostatic powder coating
Appearence:BLack（Or Customization）
Connector: Signal line In/Out; Power line In/Out
Heat Dissipation:Air Convection
Temperature Protection:65℃
Application Venues:Indoor&Outdoor
Operation Temperature:-20°C～40°C
Size:430*268*268
Weight:6.1Kg

Sorry, You are not login.

Parameter:
Power Requirements:AC90~240V 50~60Hz
Power Consumption:400W PFC>95% CE
LED Source:37x10W CREE XM-L LED Chip
Driving Current:3000mA
Color Temperature:6000-6500K
Application lifetimes:100000hours
Control Protocol:DMX-512
Channel Mode:2 DMX control mode P1,P2 (1CH or 3CH)
Control Signal:DMX-512、Stand alone、Master&Slave、Static mode、LED display
Dimming Mode:DIMMER 0 is a normal fast linear dimming, 1-4 DIMMER is a soft and nonlinear dimming
Dimming:From 0 to 100 linear dimming, smooth dimming with no vision shock in low DMX value
Optical Lens:High efficiency optical reflector cup
Strobe Speed:1~20Hz
Light Emitting Angle:8 °/ 15° / 25° / 40° / 60°
Housing Material: Tensile aluminum, surface electrostatic powder coating
Appearence:BLack（Or Customization）
Connector: Signal line In/Out; Power line In/Out
Heat Dissipation:Air Convection
Temperature Protection:65℃
Application Venues:Indoor&Outdoor
Operation Temperature:-20°C～40°C
Size:430*268*268
Weight:6.1Kg

Sorry, You are not login.

Parameter:
Power Requirements:AC90~240V.50~60Hz ± 10%
Power Consumption:330W
LED Source:31pcs 10W CREE XML LED Chip
Driving Current:3000mA
Color Temperature:7000-7500K
Application lifetimes:100000hours
Control Protocol:DMX-512
Channel Mode:2 DMX control mode P1,P2 (1CH or 3CH)
Control Signal:DMX-512、Stand alone、Master&Slave、Static mode、LED display
Dimming Mode:DIMMER 0 is a normal fast linear dimming, 1-4 DIMMER is a soft and nonlinear dimming
Dimming:From 0 to 100 linear dimming, smooth dimming with no vision shock in low DMX value
Optical Lens:High efficiency optical reflector cup
Strobe Speed:1~20Hz
Light Emitting Angle:8 °/ 15° / 25° / 40° / 60°
Housing Material: Tensile aluminum, surface electrostatic powder coating
Appearence:BLack（Or Customization）
Connector: Signal line In/Out; Power line In/Out
Heat Dissipation:Air Convection
Temperature Protection:65℃
Application Venues:Indoor&Outdoor
Operation Temperature:-20°C～40°C
Size:430*268*268
Weight:6.1Kg

Sorry, You are not login.

Parameter:
Power Requirements:AC90~240V.50~60Hz ± 10%
Power Consumption:330W
LED Source:31pcs 10W CREE XML LED Chip
Driving Current:3000mA
Color Temperature:6000-6500K
Application lifetimes:100000hours
Control Protocol:DMX-512
Channel Mode:2 DMX control mode P1,P2 (1CH or 3CH)
Control Signal:DMX-512、Stand alone、Master&Slave、Static mode、LED display
Dimming Mode:DIMMER 0 is a normal fast linear dimming, 1-4 DIMMER is a soft and nonlinear dimming
Dimming:From 0 to 100 linear dimming, smooth dimming with no vision shock in low DMX value
Optical Lens:High efficiency optical reflector cup
Strobe Speed:1~20Hz
Light Emitting Angle:8 °/ 15° / 25° / 40° / 60°
Housing Material: Tensile aluminum, surface electrostatic powder coating
Appearence:BLack（Or Customization）
Connector: Signal line In/Out; Power line In/Out
Heat Dissipation:Air Convection
Temperature Protection:65℃
Application Venues:Indoor&Outdoor
Operation Temperature:-20°C～40°C
Size:430*268*268
Weight:6.1Kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:200W
LED Source:18x10W （RGB 4IN1）
Control Channels:9Chs / 23Chs / 72Chs
Overheat Protection:65°C
Dimensions:536 x 104 x 147.5 mm
N.W.:3.42kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:120W
LED Source:36x3W （RGB 3IN1）
Control Channels:3CH
Beam Angle:60°
Dimming:16 bit Fine dimming
Overheat Protection:65°C
Dimensions:536 x 104 x 147.5 mm
N.W.:3.42kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:120W
LED Source:36x3W （RGB 3IN1）
Control Channels:3CH
Beam Angle:60°
Dimming:16 bit Fine dimming
Overheat Protection:65°C
Dimensions:536 x 104 x 147.5 mm
N.W.:3.42kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:120W
LED Source:36x3W （RGB 3IN1）
Control Channels:3CH
Beam Angle:60°
Dimming:16 bit Fine dimming
Overheat Protection:65°C
Dimensions:536 x 104 x 147.5 mm
N.W.:3.42kg

Sorry, You are not login.

Rated Voltage:AC90~240V
Rated Power:120W
LED Source:36x3W （RGB 3IN1）
Control Channels:3CH
Beam Angle:60°
Dimming:16 bit Fine dimming
Overheat Protection:65°C
Dimensions:536 x 104 x 147.5 mm
N.W.:3.42kg

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Scanning Speed:35-36Kpps
Scanning Angle:60 Deg.
Mirror Size:X=10.4*10.4mm / Y=9*16mm

Sorry, You are not login.

Configaration:
DONGLE x1
Interface x1
DVD x1
USB Cable x1
Pacakge x1

Feature:
1.Synchronous music programming
2.Simultaneous control the laser device of ILDA protocol
3.Simultaneous control the laser device of DMX-512
4.Simultaneous output vedio signal

Sorry, You are not login.

PHOENIX4-PRO Dongle(Not include interface)

Sorry, You are not login.

PHOENIX4-PRO Dongle(Not include interface)

Sorry, You are not login.

PHOENIX4-PROplus Dongle(Not include interface)

Sorry, You are not login.

PHOENIX4 USB Interface

Sorry, You are not login.

PHOENIX4 USB Interface

Sorry, You are not login.

PHOENIX4 USB Interface

Sorry, You are not login.

Parameter:
Mode:
- Ethernet connection
- DMX IN OUT
- ILDA output
- 40 000 pps
- 160 beam shows, 18 graphics shows, 200 effects, 40 sample text.

Sorry, You are not login.

Standard ILDA signal output
Oscillator signal output resolution: 16bit of X and Y axes
Color signal output resolution: 8bit color output 4x
Max. output points: 40Kpps
DMX-512 function: input / output / Bridging
Interface: 100MBit LAN
DIP switch role: set the IP address, DMX address and program selection
SD card standard: FAT 32 format, maximum support 32 GB, SD card can save up to 254 animation scenes
You can call different scenarios through 17 DMX channels, as well as a variety of effects can be superimposed on the stack
You can use the network to carry out a variety of operations and settings for the device in real time

Sorry, You are not login.

Standard ILDA signal output
Oscillator signal output resolution: 16bit of X and Y axes
Color signal output resolution: 8bit color output 4x
Max. output points: 40Kpps
DMX-512 function: input / output / Bridging
Interface: 100MBit LAN
DIP switch role: set the IP address, DMX address and program selection
SD card standard: FAT 32 format, maximum support 32 GB, SD card can save up to 254 animation scenes
You can call different scenarios through 17 DMX channels, as well as a variety of effects can be superimposed on the stack
You can use the network to carry out a variety of operations and settings for the device in real time

Sorry, You are not login.

Pangolin Quickshow Package:
FB3 USB Interface x1
USB Cable x1
Install DVD x1

Sorry, You are not login.

Pangolin Quickshow Package:
FB3 USB Interface x1
USB Cable x1
Install DVD x1

Sorry, You are not login.

Pangolin Quickshow Package:
Pangolin FB4 Net Interface x1 (without DMX & ILDA part)

Sorry, You are not login.

Full ethernet control
Stand alone SD card memory
Full color OLED display
Support for DMX, ArtNet, ILDA, OSC, and CITP (coming soon)
Modular, customizable design
Support for up to 120K scan speeds
Support for 6-color channels
Improved laser output, with interpolation
Improved communication protocol, allowing you to control more laser projectors

Sorry, You are not login.

Full ethernet control
Stand alone SD card memory
Full color OLED display
Support for DMX, ArtNet, ILDA, OSC, and CITP (coming soon)
Modular, customizable design
Support for up to 120K scan speeds
Support for 6-color channels
Improved laser output, with interpolation
Improved communication protocol, allowing you to control more laser projectors

Sorry, You are not login.

Full ethernet control
Stand alone SD card memory
Full color OLED display
Support for DMX, ArtNet, ILDA, OSC, and CITP (coming soon)
Modular, customizable design
Support for up to 120K scan speeds
Support for 6-color channels
Improved laser output, with interpolation
Improved communication protocol, allowing you to control more laser projectors

Sorry, You are not login.

Full ethernet control
Stand alone SD card memory
Full color OLED display
Support for DMX, ArtNet, ILDA, OSC, and CITP (coming soon)
Modular, customizable design
Support for up to 120K scan speeds
Support for 6-color channels
Improved laser output, with interpolation
Improved communication protocol, allowing you to control more laser projectors

Sorry, You are not login.

Full ethernet control
Stand alone SD card memory
Full color OLED display
Support for DMX, ArtNet, ILDA, OSC, and CITP (coming soon)
Modular, customizable design
Support for up to 120K scan speeds
Support for 6-color channels
Improved laser output, with interpolation
Improved communication protocol, allowing you to control more laser projectors

Sorry, You are not login.

Full ethernet control
Stand alone SD card memory
Full color OLED display
Support for DMX, ArtNet, ILDA, OSC, and CITP (coming soon)
Modular, customizable design
Support for up to 120K scan speeds
Support for 6-color channels
Improved laser output, with interpolation
Improved communication protocol, allowing you to control more laser projectors

Sorry, You are not login.

USA Pangolin: Pangolin LD2000 PRO
Contain：
1.Pro version of the QM2000 hardware control board
2.One discs
Does not contain:
QM2000 network conversion box
Pangolin LD2000 PRO Version.
FREE LivePRO, LCFlash, BEYOND SLE license

Sorry, You are not login.

USA Pangolin: Pangolin LD2000 PRO
Contain：
1.Pro version of the QM2000 hardware control board
2.One discs
Does not contain:
QM2000 network conversion box
Pangolin LD2000 PRO Version.
FREE LivePRO, LCFlash, BEYOND SLE license

Sorry, You are not login.

USA Pangolin: Pangolin LD2000 PRO
Contain：
1.Pro version of the QM2000 hardware control board
2.One discs
Does not contain:
QM2000 network conversion box
Pangolin LD2000 PRO Version.
FREE LivePRO, LCFlash, BEYOND SLE license

Sorry, You are not login.

Simulation of Moving-Heads, Scanner, Spots, LEDs
Almost all lighting effects (Wheels, Prism, Iris, Shutter, etc.)
Video Projections and Walls with Geometric Correction
Create highly realistic videos in full HD to present your show designs
High Quality Laser Simulation
Unique real-time Laser-Scanner Simulation and Volume Fog
3D Model Import (+20 formats)
DMX Controllable Machinery
ArtNET & SyncroNET Input (up to DMX 128 Universes)
Easy to use 3D-Editor and User Interface

Sorry, You are not login.