Audience Blinder
Products >> Pico Laser Systems >> 6W Muilt Color Laser System_PICO-6 5Th_SC3796
6W Muilt Color Laser System
Model:PICO-6 5Th
Item:SC3796
6W Muilt Color Laser System
ILDA-AMP  indoor use Use on stage Use in night club 

6W Muilt Color Laser System / PICO-6 5Th Technical Parameters:

Power requirements: 90~240V / 50~60Hz
Consumption: Max.400VA
Total optical output: 6.3W
Laser module: 637nm-1300mW / 445nm-3000mW / 520nm-2000mW
Beam diameter: 5mm
Divergence: <0.8mrad
Blanking: 0-5V analog, up to 100kHz TTL
Scanner: DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation Temperature: -10℃ to 40℃
Dimensions: 300*360*183mm
Package Size: 540x540x370mm
Net Weight: 16kg

Feature:
1. Pico series: laser module entirely manufactured in Europe.
2. Self-developed laser ILDA-AMP has been pre-installed inside
3. Fully sealed optical section, IP67 waterproof seal power driver
4. Self-developed temperature control system,
5. The optical bench by suspension design
6. Controller pannel for brightness and X/Y size, Invert X/Y.

Thank you for attention PICO-6 Laser Show Projector.
Pico-6 5th is the newest version and flagship laser show projector of SUPER-CAN. Suitable to small and medium venues or rental.Major used in stage laser device.Its’ laser module entirely manufactured in Europe, for brighter more vibrant colors and longer lifetimes, give better beam effect compare with common laser projector.

PICO-6 Muilt color laser system

Upgraded the Pico-6 5th, We make it smaller, and the greatly improve the radiating effect. In addition, We fix up the unique the handle system making the hanging any rotation angle. The fixed handle using in unique damping design, use it you can operate any rotation angle of projection in one hand.

Self-developed ILDA-AMP has been pre-installed. Allows to use longer ILDA signal cable to control Your laser. Interference and graphics jitter will not occur.


For the self-developed temperature control system, the projector can operate at minus 20 degrees to plus 40 degrees ambient temperature, and to have independent over-temperature protection, you no longer need to worry about delicate laser because of overheating and damage. The fan speed linear control by MCU, the projector will function in quite while in the normal temperature.You can ues it in a theather while the device will not influent the relaxed atmosphere.


Design for ILDA Standard. But you also can control by DMX or SD-card player. You can use the potentiometer to adjust the Laser projector output brightness for each color and X/Y size. It have a very good design is the convert X/Y button.
Use it you can very fast to setup the Invert X or Y axis.

01.Aug 2018

 
产品推荐
Copyright:SUPER-CAN Industry Growing Co,.LTD 
Laser Projector| Stage Laser| Outdoor Lasers| Laser Man Show| Club Laser| LED PAR​| LED UV Black Lights| Carshow Lights