Breakthrough of Sky Beam ProjectorGreen And Blue Laser (1）
What is laser
How to distinguish the merits of w..
What laser is banned in USA?
Types of Sky Beam/Landmark Laser
Laser Level Division_Supercan
Sky beam projector
Fountains Laser Show
Cambrige Technologe_Scanner system..
NightClub and Disco Laser
Green laser Light
Laser Safety Devisoin
NanoG5 JC Specification:
Parameter:
5W Single Green Laser show projector/laser system
Total optical output: 5W
Power requirements: 80-264V/50Hz (±5%)
Power consumption: max.350VA(±5%）
Laser module:DPSS JC
Laser balance:Single Green 5W/532nm
Beam diameter: 6x6mm
Divergence: <1.1mrad
Modulation: 0-5V analog, up to 30kHz TTL
Scanner Set:DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature:(Optional)
10 to 35℃(Standard)
-20℃ to 40℃( Temp.controller system)
Size:259*266*186mm
Weight: 15kg
Feature:
1. Industrial design, self-developed handle and ILDA-AMP
2. Laser module entirely manufactured in Europe
3. Black paint Stretching aluminum housing
4. Fully sealed optical section, IP67 waterproof seal power driver
5. Self-developed Temp-control system.
6. The optical bench by suspension design
7. ILDA Standard, also DMX or SD-card controlled
8. Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
9. Self-developing handle design, use it for hanging in any rotation angle, or portable.
Nano-G5JC_Green Laser Show Projcetor
Nano_G5JC is a 5W single green laser show system, which use diode laser module manufactured in Europe, suitable to small venues of laser animation shows, displays and graphics, as well the 3D laser man show, especially suitable for tour shows because of its' voltage range of 80V to 264V.
This model can run up the Phoenix Pro version, just add the curtain and need some smoke released, and then come the laser man show.
Unique self-developed handle is assembled into this model, it can make device use in different spaces, hanging up and hanging side even upside down.
Unique handle design
It can be equipped the self-developed temperature control system, make this device well function between -20℃ to 40℃.
Optical system use the technology of completely closed design that waterproof and dustproof, allow the device well functioning in different harsh environment.
The laser show projector is additionally install heat dissipation frame so that the whole CFM flux is doubled.
Fan speed is also reduced by 63%, the overall operating noise reduction of 11%.
In an environment of less than 20℃, the noise of the whole machine is reduced to 32db.That make it very suitable for the theater, music hall and other equipment noise has strict requirements of the occasion.
Nano_G5JC is suitable for small venue like bar, club; wedding celebration and 3D laser man show needed good quality laser system, for it has lighter weight it would really easy and convenient to remove and install in kind of tour shows and concerts as well.
In comparison to the Pico series, yet this model don’t have full color, usually it comes in additional item. However, this model has its advantage of its nice cost performance radio; this item would be good choice if it’s suitable for your stage lighting design.
Suitable Case:
Small and Medium venues(area≤500㎡，height＜6m）
ANNOUNCEMENT: This kinds of landmark laser projector is self-developed by Supercan CO.,LIT, which is the only official certificated productions in mainland China.
Do not believe other websites false info; my company reserves the right to pursue legal action.
READ THE CERFICATE AND PETENT
KNOW MORE ABOUT LASER SHOW
07.Nov 2016
