Products >> Stage Parcan Lighting >> 54x3in1 RGB Parcan_LD401-5403TRI_SC3903
54x3in1 RGB Parcan
Model：LD401-5403TRI
Item：SC3903
54x3in1 RGB Parcan / LD401-5403TRI Technical Parameters:
Rated Voltage:AC90~240V
Rated Power:180W
LED:54x3in1 RGB LED Chip
Refresh Frequency:4KHz
Channels:3Chs / 4Chs / 5Chs / 6Chs / 9Chs
Firmware:LD611-54031 V3.12
Beam Angle: 25°
Overheat: Dimming down
Cooling:Fan
Dimensions:360 x 221 x 266 mm
N.W.:3kg
LD401-5403TRI is a low cost with fan cooling LED stage Parcan lighting. Using for club, rental shows ect.
Using SUPER-CAN 32bit Micro controller, speed more fast than normal version, refresh rate up to 4KHz.
You can forget the dirty color, maybe too much red or too much blue. It will fix by MCU.
Standard DMX-512 Control, it can operate from 3 channels to 9 channels.
On the LED screen, You can chooes how many channles you want. This function sometimes is very helpful for some place.
You can save more channles to control more stage lighting.
With tempture calculate function, if the LED chips tempture over heat, LED driver current will slow down.
Most of the time, You are not feeling the brightness go down. But the LED Chips tempture will going down.
This function can protect Your LED chips have mor live time.
We have upgrade the DMX-512 singal part. add the port protection component, can be up to 2KV ESD.
Version History:
V3.12
Using New 3Chs Dirver, Full SMD PCB.
Re-write the color balance function.
Refresh Frequency:4KHz
V3.11
Using 6Chs Driver, Add color balance function. Add overheat dot.
V3.01
The same with V3.0, Add the tempture fail dot.
V3.0
Using high current LD706 4Chs Driver, Each channel 3A.
Refresh Frequency:5KHz
08.Dec 2019
